Therma-Floor® Delivers the Heat...
... acting as the thermal mass in a radiant floor heating system.

Project Spotlight

South East Jr. High School
Maxxon® DPM and Level-Right® FS-10

Location: 
Iowa City, IA

Scope: 

  • 4500 sq. ft. of Maxxon® DPM, then poured Level-Right® FS-10 to provide a smooth, level surface for installation of the new vinyl.

Maxxon Dealer:

Skold Construction Services
Des Moines, IA

Overview: Previously, a vinyl tile adhesive failure occurred due to high water vapor emissions. DPM and Level-Right FS-10 installation was completed on a Thursday. Vinyl floor covering was installed the following Monday. This allowed the school district to address their moisture issues with a minimum of loss of room usage.

   
Moisture moving through the concrete
was causing tile adhesive to fail
  Mixing Maxxon DPM  

Material is spread evenly with a broom
at 200 sq. ft. per kit

         
 

Sand is broadcasted onto the fresh
DPM to prepare the surface for
Level-Right FS-10

 

Installed vinyl floor covering


Maxxon provides underlayment, gypcrete, gypsum concrete and other flooring underlayment products for construction, remodeling and renovation.
This site and all contents copyright © 2001-2008 MAXXON Inc. All rights reserved.

 Home | Canada | en français | en español