Level-Right® FS-10

Therma-Floor® Delivers the Heat...
... acting as the thermal mass in a radiant floor heating system.

Level-Right FS-10 is a self-leveling concrete

Manufacturer:
Maxxon^® Corporation
920 Hamel Road
P.O. Box 253
Hamel, MN 55340
Phone: 1-800-356-7887 or (763) 478-9600
Fax: (763) 478-2431

Product Description:
Levels, Smoothes, Repairs 0-10 mm (0 - 3/8"), FAST

When the job calls for a new floor that's smooth, level and super fast-setting, Level-Right^® FS-10 comes to the rescue. Ideal for thin-topping applications over concrete, it provides a smooth, level new surface that dries fast to keep your job on schedule, and to allow for placement of floor goods soon after application.

Product Advantages:

New construction or renovation
Levels entire floors or transition areas, featheredge to deepfill
Resurfaces old or damaged concrete floors
Up to 7200 PSI (50 MPa), hydraulic cement
Water resistant
Caps cracked, lightweight concrete
Above, on or below grade
Fills "duck ponds" in concrete floors
No troweling required
Provides a temporary wear surface in as little as two to four hours after application
Experienced, authorized applicators worldwide
Exceeds standards set by leading floor goods manufacturers
Easy mixing - just add water
Can be barrel-mixed or used in any continuous pumping machine

Technical Data:

Compressive Strength: Modified ASTM C 109	Typical: 1500 PSI (10.3 MPa) 1 day 5270 PSI (36.2 MPa) 7 days 5500-7200 PSI (38-50 MPa) 28 days
Freeze/Thaw Resistance: ASTM C 666	90% +/-3%
Dry Density:	Approx. 120-125 lbs/ft³ (1922-2003 kg/m³)
Tensile Strength: ASTM C 190	1200 PSI (8.3 MPa) (28 days)
Abrasion:	ASTM Taber 250 Cycles 1000 gram load on H 22, 4" wheels: wt. loss 0.30 gram
Shear Bond Strength with Concrete: ASTM C 882-91	1060 PSI (7.3 MPa) 56 days
Shear Bond Strength with Level Right FS-10: ASTM C 882-91	3160 PSI (21.7 MPa) 56 days

'Green' Information:

Sample USGBC LEED Credit Areas*
Project	Credit	Category	How Requirement is Fulfilled
Materials & Resources	MR 2.1-2.2	Construction Waste Management	Recyclable packaging and shipping materials
	MR 4	Recycled Content	Pre-Consumer Slag
	MR 5	Local/Regional Materials	Manufactured in West Grove, PA 19390; Job site manufactured with local sand & water

* Credits may vary depending on project type and Maxxon products used.

For additional information on the USGBC and Level-Right FS-10's qualifications for earning LEED points, please see our "Green" page.

Level-Right® FS-10 Data Sheet

Level-Right^® FS-10 Data Sheet