Enkasonic® HP Data Sheet
920 Hamel Road
P.O. Box 253
Hamel, MN 55340
Phone: 1-800-356-7887 or (763) 478-9600
Fax: (763) 478-2431
The original sound control mat just got better. Enkasonic® HP provides added impact noise control with an added layer of high performance acoustical fabric. The HP layer is laminated to the bottom of a core of fused entangled polymeric filaments, which is attached to a non-woven, water resistant
fabric. To complete the Maxxon engineered sound control system, Enkasonic HP is topped with a high-strength Maxxon Underlayment.
Enkasonic HP increases the IIC levels of the floor/ceiling assembly by up to 19 points over wood frame construction and up to 25 points over concrete construction. Enkasonic HP is an approximate 3/8" thick mat and requires only a 1" topping. For thinner pours, an approved reinforcement may be used to reduce the underlayment depth to 3/4" minimum. Enkasonic HP, an Eco-Friendly Building Product, is composed of 40% pre-consumer recycled content.
Complete Detail Drawing
||Entangled polymeric filament mat (40% recycled content) attached to a layer of acoustical fabric
||3/8" (10 mm)
||approx. 23.54 oz/y2
|Enkasonic HP Color:
||black with white fabric
· water resistant fabric
|Flammability ASTM E-84
||Fuel Contribution: 0
Smoke density: 0
Flame Spread: 0
500 psf (2440 kg/m²)
1000 psf (4880 kg/m²)
2000 psf (9760 kg/m²)
0.069" (1.75 mm)
0.146" (3.71 mm)
0.264" (6.71 mm)
||1" (25 mm)
* Credits may vary depending on project type and Maxxon products used.
|Sample USGBC LEED Credit Areas*
||Low Emitting Materials
||Indoor Air Quality Assessment
Enkasonic HP is GREENGUARD and GREENGUARD Gold Certified.
For additional information on GREENGUARD from UL Environment, the USGBC, and Enkasonic HP's
qualifications for earning LEED points,
please see our "Go Green" page.