Therma-Floor® Delivers the Heat...
... acting as the thermal mass in a radiant floor heating system.

Enkasonic^® Data Sheet

Manufacturer:
Maxxon^® Corporation
920 Hamel Road
P.O. Box 253
Hamel, MN 55340
Phone: 1-800-356-7887 or (763) 478-9600
Fax: (763) 478-2431

Product Description:
Enkasonic^® creates sound-rated floors with the high IIC and STC level required by ICBO, UBC and FHA for luxury developments. It is a durable and proven solution - the only mat that has been tested after 10 years of use. (Enkasonic retained 97% of original thickness, was as pliable as a new roll, and performed equally to a newly manufactured roll.) It increases IIC levels up to 12 points over wood frame, and up to 20 points over concrete. It also increases the STC rating 6-15 points over a bare wood frame system.

Enkasonic is always "Green" with 40% pre-consumer recycled content. It is also offered with optional water resistant fabric.

Complete Detail Drawing

Technical Data:

Deflection:
Material Composition:	Nylon
Thickness:	.4" (10.2 mm)
Density:	4.65 pcf (74.4 kg/m³)
Enkasonic Color:	black with white fabric · optional water resistant fabric
Flammability ASTM E-84	Fuel Consumption: 0 Smoke density: NFPA Class A Flame Spread: NFPA Class A
Pressure 500 psf (2440 kg/m²) 1000 psf (4880 kg/m²) 2000 psf (9760 kg/m²) 4000 psf (19520 kg/m²)	Deflection 0.087" (2.21 mm) 0.131" (3.327 mm)0.189" (4.801 mm)0.256" (6.502 mm)
Underlayment Depth:	1 1/2" (38 mm)
Underlayment Depth with Maxxon CSM:	1" (25 mm)

'Green' Information:

Sample USGBC LEED Credit Areas*
Project	Credit	Category	How Requirement is Fulfilled
Indoor Environmental Quality	LEED for Schools EQ Prerequisite 3	Minimum Acoustical Performance Required	Sound tests available based on various floor/ceiling assemblies
Indoor Environmental Quality	LEED for Schools EQ 9	Enhanced Acoustical Performance	Sound tests available based on various floor/ceiling assemblies
Materials & Resources	MR 4.1 - 4.2	Recycled Content	Nylon, 40% Pre-Consumer
Materials & Resources	MR 5.1	Local/Reg. Materials	Enka, NC 28728

* Credits may vary depending on project type and Maxxon products used.

For additional information on the USGBC and Enkasonic's qualifications for earning LEED points, please see our "Green" page.

Code Listings:

ICC-ES Legacy Report ER-4778

Enkasonic® Data Sheet

Enkasonic^® Data Sheet