Home > Self-Leveling Floors > Dek C-Ment

Dek C-Ment™ Data SheetMaxxon Green Mark

Dek C-Ment

Manufacturer:

MaxxExterior®, LLC
920 Hamel Road
P.O. Box 253
Hamel, MN 55340
Phone: (855) 318-2249

Product Description:

When looking for a solution to top steel deck, look no further than Dek C-Ment. With compressive strengths up to 4000 psi, Dek C-Ment provides a strong, versatile topping for even the most challenging projects. By requiring only a single pour, Dek C-Ment saves time and labor expense on your project. Dek C-Ment takes foot traffic in as little as 90 minutes, allowing light trade work to resume and moving your project towards completion more quickly.

For added sound control, a Maxxon® sound control mat can be installed with Dek C-Ment to significantly reduce impact and airborne sound transmission.

 

 

 

Dek C-Ment


Technical Data:

Compressive Strength: Up to 4,000 psi (28.0 MPa) when tested in accordance with modified ASTM C109M
'K' Factor: 4.76 (Btu · in)/(h · ft² · ºF) (.6854 W/[m · ºC])
Specific Heat: .229 Btu/(lb · ºF) at 85 ºF (.9595 kJ/[kg · ºC] at 29.44ºC)
Dry Density: 115 lbs./ft³ (1,840 kg/m³)
Point Loading: Typical loading of up to 4,000 lbs. (24.1 MPa)
Surface Burning Characteristics: Flame spread: 0
Fuel contributed: 0
Smoke density: 0


'Green' Information:

Sample USGBC LEED Credit Areas*
Project Credit Category
Environmental Quality EQ 2 Low Emitting Materials
  EQ 4 Indoor Air Quality Assessment
  EQ 9 Acoustic Performance
Materials & Resources MR 3 Building Product Disclosure and Optimization - Sourcing Raw Materials
* Credits may vary depending on project type and Maxxon products used.

 

For additional information on Dek C-Ment's qualifications for earning LEED points, please see our "Go Green" page.

Code Listings: