Acousti-Mat CLP® - Installation Guidelines - Maxxon

Maxxon's "Green" Sound Mats
Maxxon's "Green" Sound Mats may contribute towards earning LEED points.

Acousti-Mat CLP offers sound control in concrete high rise projects

1. Acousti-Mat CLP Adhesive is rolled out over clean and contaminant free concrete. Over rough concrete surfaces, a slurry of Maxxon Underlayment should be utilized.		2. Acousti-Mat CLP is then placed into wet adhesive or slurry. Seams should be butt jointed or overlapped, depending upon the topping application.		3. Back roll Acousti-Mat CLP to ensure that 100% surface contact is achieved with adhesive or slurry application.

4. Isolation strips are installed around all walls, columns, and floor penetrations to eliminate flanking paths. Acousti-Mat CLP Isolation Strips can also be utilized to cover any exposed concrete between seams in the Acousti-Mat CLP.		5. Acousti-Mat CLP is topped with an approved Maxxon Underlayment. For uniform depth and a smooth surface, installers use a screed to finish the underlayment surface. Option: Floor goods such as tile, floating wood floor, or glue down wood floor may be glued directly to Acousti-Mat CLP.		6. In as little as two hours after the underlayment has been poured, the floor is hard enough to accommodate foot traffic. Utilizing a Maxxon Underlayment over the Acousti-Mat CLP provides a smooth flat underlayment that can meet the floor flatness criteria of the finished floor goods.* * Floor flatness requirement must be discussed with the general contractor during the bidding process.

† Product Depth

Sound Mat	Gypsum Underlayment Depth	Level-Right^® Self-Leveling Underlayments & WearTop^TMDepth
Acousti-Mat CLP	Nominal 1/2" (12.7 mm)	3/8" (9.5 mm) with Acousti-Mat CLP with Reinforcement

Maxxon provides underlayment, gypcrete, gypsum concrete and other flooring underlayment products for construction, remodeling and renovation.
This site and all contents copyright © 2001-2008 MAXXON Inc. All rights reserved.

Home | Canada | en français | en español