Level-Right® Weartop
Level-Right® WearTop provides a durable wear surface.

Acousti-Mat^® 3 Data Sheet

Manufacturer:
Maxxon^® Corporation
920 Hamel Road
P.O. Box 253
Hamel, MN 55340
Phone: 1-800-356-7887 or (763) 478-9600
Fax: (763) 478-2431

Product Description:
Acousti-Mat^® 3 is the sound deadening solution for floor systems that have been impossible to control! Now you can put an end to those "noise" complaints - even with open beam, concrete slab and conventional wood frame systems.

Acousti‑Mat 3 consists of a nylon core of fused, entangled filaments attached to a non-woven fabric, similar to Maxxon's Acousti‑Mat II, only three times thicker. It's a proven fact that the larger the air space, the greater the sound control - and this system creates the largest air void of any sound control mat. Acousti-Mat 3 increases IIC levels up to 17 points over wood frame, and up to 25 rating points (or more) over concrete. It also increases the STC rating 6-15 points over a bare wood frame system.

Acousti-Mat 3 is now always "Green" with 40% pre-consumer recycled content. It also has water resistant fabric.

Complete Detail Drawing

Technical Data:

Deflection:
Material Composition:	Nylon
Thickness, nominal:	0.8" (20.3 mm)
Density:	2.66 pcf (42.6 kg/m³)
Acousti-Mat 3 Color:	black with white fabric · water resistant fabric
Flammability ASTM E-84	Fuel Contribution: 0 Smoke density: NFPA Class A Flame Spread: NFPA Class A
Pressure 50 psf (244 kg/m²) 100 psf (488 kg/m²) 200 psf (976 kg/m²) 300 psf (1464 Kg/m²)	Deflection 0.05" (1.27 mm) 0.08" (2.03 mm)0.15" (3.81 mm)0.21" (5.33 mm)
Underlayment Depth:	1 1/2" (38 mm) plus wire mesh
Underlayment Depth with Maxxon CSM:	1 1/2" (38 mm)

'Green' Information:

Sample USGBC LEED Credit Areas*
Project	Credit	Category	How Requirement is Fulfilled
Indoor Environmental Quality	LEED for Schools EQ Prerequisite 3	Minimum Acoustical Performance Required	Sound tests available based on various floor/ceiling assemblies
Indoor Environmental Quality	LEED for Schools EQ 9	Enhanced Acoustical Performance	Sound tests available based on various floor/ceiling assemblies
Materials & Resources	MR 4.1 - 4.2	Recycled Content	Nylon, 40% Pre-Consumer
Materials & Resources	MR 5.1	Local/Reg. Materials	Enka, NC 28728

* Credits may vary depending on project type and Maxxon products used.

For additional information on the USGBC and Acousti-Mat 3's qualifications for earning LEED points, please see our "Green" page.

Acousti-Mat® 3 Data Sheet

Acousti-Mat^® 3 Data Sheet